seamus7227
Member
This was an idea of mine quite some time ago, I finally got around to making it(like over a year). I'm not very fond of it, but the idea was to create a pen for a customer of mine in the Dallas/Ft. Worth area using the 458 casing. So my thoughts were to make it look like its one long shell casing split in the middle with what looks like black powder(carbon fiber) in the middle. Anyway, the guy has waited long enough, now I can tell him its done! Weww
The clip is actually a section of a 30-30 shell covered with silver solder and sanded lightly around the edges to show some brass. clip is soldered into 458 casing via a hole drilled in finial end. It was a pain to make, but i learned an awful lot from it, and ultimately, that was my goal.
The clip is actually a section of a 30-30 shell covered with silver solder and sanded lightly around the edges to show some brass. clip is soldered into 458 casing via a hole drilled in finial end. It was a pain to make, but i learned an awful lot from it, and ultimately, that was my goal.
Attachments
Last edited: