Dave, one of each would be a tap, a bottoming tap, a 1inch die, a 1.5 inch die and you can have any color of finish you want as long as its "factory finish":biggrin:
IS that what you meant?
IS that what you meant?
OFFICIAL M14X.8 X 3 TAP/DIE SIGN UP THREAD
- Thread starter mredburn
- Start date
Signed-In Members Don't See This Ad
- Status
Signed-In Members Don't See This Ad
Texatdurango
Member
Dave, one of each would be a tap, a bottoming tap, a 1inch die, a 1.5 inch die and you can have any color of finish you want as long as its "factory finish":biggrin:
IS that what you meant?
Oh that's Just swell......... me and Curly wanted some snappy colors and we get put on the "ignore list" yet Dave gets his choice of colors!
mrburls
Member
Mike, put me down for an 1 1/2" die rather than a 1" My tool maker is going to be making me a 1 1/2" die holder for me.
Thanks, Keith "mrburls"
Thanks, Keith "mrburls"
dgscott
Member
I'm in for 1 tap and a 1" die. PM paypal info.
Thanks.
Doug
Thanks.
Doug
johncrane
Member
Mike!
Put on your list for
1 Tap
1 Bottom Tap
1,5 Die
also Mike thankyou for doing this, i also forgot to tell you my other order arrived last week in good Nik sorry i'm a bit slack,Mike again many thanks for all your time and effort your put into these group buys .
Put on your list for
1 Tap
1 Bottom Tap
1,5 Die
also Mike thankyou for doing this, i also forgot to tell you my other order arrived last week in good Nik sorry i'm a bit slack,Mike again many thanks for all your time and effort your put into these group buys .
1-Chugbug ...+bottom tap
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill
18-rudya7
19-wizard 1 standard die set
20 wizard 1 set with ..... +1.5
21-grampy122 ......bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner
26-Jerryconn
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill
18-rudya7
19-wizard 1 standard die set
20 wizard 1 set with ..... +1.5
21-grampy122 ......bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner
26-Jerryconn
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12
Last edited:
Mike: Would you please change my request from a 1" die to a 1 1/2" die. Seems like that is the trend. Must be a reason. That would be one tap and one 1 1/2" die. Thanks!!! joefyffe
That would be one tap and one 1 1/2" die. Thanks!!! joefyffe
Last edited:
Grampy122
Member
Change my order.
Mike, Would you please change my request from a 1" die to a 1 1/2" die and add a bottoming tap. Thank you.
Gordie
Mike, Would you please change my request from a 1" die to a 1 1/2" die and add a bottoming tap. Thank you.
Gordie
scotian12
Member
Mike...would you please add my name to the basic set. Thanks for conducting the group buy. Shipping to Canada. Darrell Eisner
zapdafish
Member
Any chance at someone posting a link to show how to use these? I take it these are for kitless pens? It's something I might be interested in exploring but am clueless other than ooing and aahing over some of the stuff I have seen.
thnx
thnx
its_virgil
Member
Mike,
Super Size my die also. No fries, no pie, thanks.
Do a good turn daily!
Don
Super Size my die also. No fries, no pie, thanks.
Do a good turn daily!
Don
1-Chugbug ...+bottom tap
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill........................+1.5 DIet coke hold the mayo
18-rudya7
20 wizard 2 ... sets both with ..... +1.5 x 2
21-grampy122 ......+bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner
26-Jerryconn
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher +bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12
35-manik ... +bottom ........+1.5
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill........................+1.5 DIet coke hold the mayo
18-rudya7
20 wizard 2 ... sets both with ..... +1.5 x 2
21-grampy122 ......+bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner
26-Jerryconn
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher +bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12
35-manik ... +bottom ........+1.5
Last edited:
wizard
Member
Mike,
Would you please make both of my sets with the 1.5 die. Thanks! Doc
Would you please make both of my sets with the 1.5 die. Thanks! Doc
manik
Member
I would like to get in on this group purchase if it is not too late.
I would like one tapered tap, one bottoming tap and one 1.5" die.
I appreciate the effort you have put into this and hope I am not too late.
Thanks
I would like one tapered tap, one bottoming tap and one 1.5" die.
I appreciate the effort you have put into this and hope I am not too late.
Thanks
Its not to late at all.........your posted to the list.
Jerryconn
Member
Mike,
Please change my die to a 1.5" also. Thanks for putting this together.
Please change my die to a 1.5" also. Thanks for putting this together.
khogan16
Member
IM in for a tap and die set 1" please let em know what I owe you
1-Chugbug ...+bottom tap
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill........................+1.5 DIet coke hold the mayo
18-rudya7
20 wizard 2 ... sets both with ..... +1.5 x 2
21-grampy122 ......+bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner
26-Jerryconn................+1.5
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher +bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12
35-manik ... +bottom ........+1.5
36-khogan16
37-Kasper..........................+1.5
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill........................+1.5 DIet coke hold the mayo
18-rudya7
20 wizard 2 ... sets both with ..... +1.5 x 2
21-grampy122 ......+bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner
26-Jerryconn................+1.5
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher +bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12
35-manik ... +bottom ........+1.5
36-khogan16
37-Kasper..........................+1.5
Last edited:
This is the last week for sign up the totals so far are
39- taper taps
9-bottom taps
13- 1 inch die
27-1.5 inch die
4- lattes
1- pink die
and a diet coke
hold the fries.
I will figure the totals out today and post the costs for each setup. I will also send out pms later today.
39- taper taps
9-bottom taps
13- 1 inch die
27-1.5 inch die
4- lattes
1- pink die
and a diet coke
hold the fries.
I will figure the totals out today and post the costs for each setup. I will also send out pms later today.
Last edited:
Curly
Member
I count 9 bottom taps. Or does the number somehow come up differently when you count in metric?
Texatdurango
Member
Technically it's "Hot Fuchsia" but for the laymen, pink is close enough! Does this mean I won't get a color matched tap? :frown:
Looking good Mike, these buys take up a lot of time and effort and it is much appreciated!
You are correct Curly there are 9 bottoming taps I have updated the info
Aaargh
I wish I could get in on this. But I have just cleaned out my PayPal on another commitment :frown:.
Well, if anyone ends up picking up an extra set, I'd be happy to spring for it plus a bit when my PayPal fattens up again.
Ken
I wish I could get in on this. But I have just cleaned out my PayPal on another commitment :frown:.
Well, if anyone ends up picking up an extra set, I'd be happy to spring for it plus a bit when my PayPal fattens up again.
Ken
Last edited:
Kaspar
Member
I've been going back and forth on this one. I really can't afford it, but I guess I can't not afford it even more. :biggrin: Put me down for the basic set. (No bottoming tap.) And though I don't have a holder for it yet, make it the 1.5" die. (Great! Something else for me to make / buy.)
Currently the cost will be! (drum roll Please)
A Basic set;... 1-taper tap and 1- 1 inch die =$119.00
A 1.5 set;...... 1-taper tap and 1-1.5 inch die =$121.00
The super sized set;
1-taper tap 1-bottoming tap 1- 1.5 inch die =$187.00
This includes shipping to me and U.S. priority shipping to you.
For those of you that need shipping outside the U.S. add $2.00 to the total for regular mail. Or pm me if you want Priority mail outside the U.S.
Those 4 of you with 2 sets on order can deduct $5.00 from one set. There is a $5.00 shipping charge included in each set for priority mail.
Unless we have a run on the last minute sign ups, these prices will pretty well be it.
WE will need at least 8 more of the taper taps sold to make it to the next level and 3 of the bottoming taps
MY PAYPAL is
sales@silverpenparts.com
PLease put your IAP name in the comments. IT really helps.
PM me if you wish to send payment by mail. Payments are due by next Sunday MIdnight. (Do I hear a fading sunday! sunday! sunday!)
Thanks Mike
ps. Hot Fuchsia is $20.00 more
A Basic set;... 1-taper tap and 1- 1 inch die =$119.00
A 1.5 set;...... 1-taper tap and 1-1.5 inch die =$121.00
The super sized set;
1-taper tap 1-bottoming tap 1- 1.5 inch die =$187.00
This includes shipping to me and U.S. priority shipping to you.
For those of you that need shipping outside the U.S. add $2.00 to the total for regular mail. Or pm me if you want Priority mail outside the U.S.
Those 4 of you with 2 sets on order can deduct $5.00 from one set. There is a $5.00 shipping charge included in each set for priority mail.
Unless we have a run on the last minute sign ups, these prices will pretty well be it.
WE will need at least 8 more of the taper taps sold to make it to the next level and 3 of the bottoming taps
MY PAYPAL is
sales@silverpenparts.com
PLease put your IAP name in the comments. IT really helps.
PM me if you wish to send payment by mail. Payments are due by next Sunday MIdnight. (Do I hear a fading sunday! sunday! sunday!)
Thanks Mike
ps. Hot Fuchsia is $20.00 more
Last edited:
Dan_F
Member
Paypal sent today, but I'm on the 5 day delay plan, should still get there by Sunday though.
Dan
Dan
Not a problem Dan, It will take 3 weeks from the order date to get the sets. Im just looking for financial commitment to back up the verbal one.:biggrin:
Grampy122
Member
Money sent
Paypal sent today. Thank you for doing this.
Paypal sent today. Thank you for doing this.
1-Chugbug ...+bottom tap...+1.5
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill........................+1.5 DIet coke hold the mayo
18-rudya7
20 wizard 2 ... sets both with ..... +1.5 x 2
21-grampy122 ......+bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner....BOttom tap......
26-Jerryconn................+1.5
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher +bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12.....................+1.5
35-manik ... +bottom ........+1.5
36-khogan16
37-Kasper..........................+1.5
38-HeathRiley......................+1.5
2-TexatDurango................+1.5 die
3-TomW
4-TImeBandit....................+1.5 2 sets of each
5-rstought.........................+1.5
6-dtswebb...... 1inch die and +1.5 die
7-wade45
8-rsjimenez........................+1.5
9-ragz
10-out
11-Borg B BOrg +bottoming tap ...+1.5
12- Curly +bottoming tap......+1.5 die size
13-mr burls.........................+1.5
14-Mark D..........................+1.5
15-gwd
16-Dan F ..........................+1.5
17-Its Virgill........................+1.5 DIet coke hold the mayo
18-rudya7
20 wizard 2 ... sets both with ..... +1.5 x 2
21-grampy122 ......+bottom tap...+1.5
22-043Turning......+bottoming tap......1.5die
23-joefyffe...............+1.5
24-evjenkins
25-Dave Turner....BOttom tap......
26-Jerryconn................+1.5
27-apple320
28-PTownsubbie............+1.5
29-stickrounder.............+1.5
30-Big shed ................+1.5 x2 sets
31-Constant Laubscher +bottoming tap+1.5 x 2 sets
32-dgscott
33- John Crane.........+bottom tap +1.5
34-scotioan12.....................+1.5
35-manik ... +bottom ........+1.5
36-khogan16
37-Kasper..........................+1.5
38-HeathRiley......................+1.5
Last edited:
dtswebb
Member
Mike -
The payment has been sent to you via paypal.
Thank you.
Matthew
The payment has been sent to you via paypal.
Thank you.
Matthew
Timebandit
Member
Lol! I like how tex's name is in pink!!! Nice touch mike
Correction Justin "HOT Fuchsia"
Wouldnt want George to think we werent paying attention!
Wouldnt want George to think we werent paying attention!
Last edited:
Timebandit
Member
Doh!!!! Duh!!! Please forgive me!!! George I meant no offense:biggrin:biggrin
Curly
Member
Payment sent!
I would like my set in tool steel silver...to match the rest of my taps and dies
I wanted mine in transparent aluminium because when I put it down and can't find it, even though I am looking right at it, I'll have an excuse.
Mike I am holding off my payment until near the end in case we are 1 bottoming tap shy of the minimum. In that case I'll double up my supersize and flog it on the inevitable late buyer. :wink:
scotian12
Member
Mike...Please up size mine to 1.5. Thanks Darrell Eisner
Signed-In Members Don't See This Ad
CUrly not a problem on time frame however the current prices on the bottoming tap are set at the 9 piece level. we will need 12 to break in to the next price break.
MIke
MIke
- Status