Art Deco Ballpoint

From IAP-Wiki
Jump to navigation Jump to search

General Information
[edit]

Available in both ballpoint single tube and two tube roller ball and fountain pen.


Alternative Names[edit]


Bushing Sizes[edit]

The bushing sizes are documented on the instructions, but the actual measurements of the fittings and tubes are listed below.

The fittings are both 0.495"

Note: The bushings for this pen are the Majestic Squire bushings.  So if you have a set of JohnnyCNC's TBC bushings, you are set.

Tube Length(s)[edit]

 

Tube Dimensions
  Tube
I.D.
0.347"
O.D.
0.365"
Length 1.994"

 



Sources[edit]

This pen is only available at Penn State Industries


Assembly tips[edit]


Common Pitfalls[edit]

If you have to dis-assemble the nib or clip, use a transfer punch to remove the fitting.  The fitting is composed of several pieces that may separate when being driven out.  If this happens, drill a 9mm or 23/64" hole in a scrap piece of acrylic and insert the tube portion of the fitting into the hole.  Press the fitting back together.