Art Deco Ballpoint
From IAP-Wiki
Contents |
General Information
Available in both ballpoint single tube and two tube roller ball and fountain pen.
Alternative Names
Bushing Sizes
The bushing sizes are documented on the instructions, but the actual measurements of the fittings and tubes are listed below.
The fittings are both 0.495"
Note: The bushings for this pen are the Majestic Squire bushings. So if you have a set of JohnnyCNC's TBC bushings, you are set.
Tube Length(s)
| Tube Dimensions | Tube |
|---|---|
| I.D. | 0.347" |
| O.D. | 0.365" |
| Length | 1.994" |
Sources
This pen is only available at Penn State Industries
Assembly tips
Common Pitfalls
If you have to dis-assemble the nib or clip, use a transfer punch to remove the fitting. The fitting is composed of several pieces that may separate when being driven out. If this happens, drill a 9mm or 23/64" hole in a scrap piece of acrylic and insert the tube portion of the fitting into the hole. Press the fitting back together.
