IAP Home - Photos - IAP Collection Pen #15
     International Association of Penturners
Pens for Service Members
 
Support The IAP

Go Back   International Association of Penturners > Photos > The IAP Collection
  Forgot Password
Register FAQ Members List Search Today's Posts Mark Forums Read
  Toggle Photos
Navigation


These ads help support the IAP, but you can hide them!
Toggle Filmstrip - Go to The IAP Collection
IAP Collection Pen #13
IAP Collection Pen #14
IAP Collection Pen #15
IAP Collection Pen #16
IAP Collection Pen #17
Current

Toggle The IAP Collection - IAP Collection Pen #15 Toolkit
Click to view original

Toggle Information
Posted By admin [Profile] [Photos] Category The IAP Collection
Original Filesize 472.8 KB Original Dimensions 1600 x 2837
Date Posted 01-08-2015 11:08 AM Number Of Views 653
Title IAP Collection Pen #15
Description Castle Concept Pen by Phil Morris
Date Added to Collection October 25, 2014
Maker Phil Morris
Materials Walnut, Buckeye Burl, Aluminum Flashing and Blue Acrylic
Components Rhodium and Black Titanium Majestic
Tools / Machinery Used Jet 1221 VS lathe. Woodchuck Uni-Tool with round cutter; Woodchuck PenPro with 2 degree radius, various shop tools
Process The bottom of the base is Walnut with a wall section of black pearl cast acrylic turned and hollowed for the next cast of a blue and green mix to look like water with moss in it. The water was turned with ripples in it to look like it is lapping against the wall, then inset into the black.

The pen was started with 4 stabilized blanks of Buckeye Burl and a Walnut veneer. Blanks were squared and glued with a layer of veneer in between till it was square. I drilled a hole through the blank then cut slices and a layer of veneer glued between each slice. The previously drilled hole is used to thread the pieces over a dowel rod to keep them lined up for gluing.

The mid-section of each blank is Walnut with Blue Acrylic cut to thickness and segmented with Aluminum spacers. The blue is cut in squares and the Walnut is cut the same thickness and glued to Make a 45 degree angle and stacked. The turret top was turned oversized then hollowed out for the creation of the...
Maker's Comments Not Available


All times are GMT -5. The time now is 11:42 AM.

Powered by vBulletin® Version 3.7.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0

Content Copyright © 2003-2016 by Penturners.org, LLC; All Rights Reserved
Terms Of Service   Acceptable Use Policy