sienna

Signed-In Members Don't See This Ad
  1. G

    A couple of Tru-Stones Siennas

    Completed a couple of Siennas dressed in Tru-Stone today. Sure do need sharp tools with these. Sanded using Abranet to 600 grit and then wet sanded with MM pads through 12000 followed by polishing three times with One Step plastic polish. Comments and critique welcome. thanks for looking.
  2. turbowagon

    CSUSA Sienna pen -> pencil conversion

    For the record, it can be done the same way as the Sierra kit. Use a Schmidt 0.7mm or 0.5mm mechanism. 1. widen the back of the transmission with a 3/32" bit 2. drill out the nib section from the inside with a 1/8" bit until the pencil tip protrudes between .160" and .165" and the lead...
Top Bottom