Trustone Majestic anti-pimp and custom grip

Signed-In Members Don't See This Ad
See more from hewunch

hewunch

hewunch

Member
Joined
Aug 5, 2008
Messages
4,698
Location
Albany, GA
So here is a nod to my good friend Brooks803, with the replaced pimp stone. And then.... ANOTHER NOTCH :smile:. I got to tell you this is my first custom grip or section whatever and I seriously had some puckering going on while drilling this baby. Anyways, comments welcome. I think it is Red Jasper Trustone. Polished to 12000 mm then Plastix Polish.

majestictrustoneclipsm.jpg

majestictrustoneclipopen.jpg
 
Signed-In Members Don't See This Ad
Hans that is awesome! How was turning the clip inlay? Love it! If you can hang on to it long enough bring it next Sat to the meeting, I'd love to see it in person!
 
the clip inlay was easy. Finding it when it fell on the ground in my dirty shop.... not so much.

Saturday shouldn't be a problem. But if the price is right.... :biggrin:
 
Hans, Great grip section and I love that kit with out a Pimp Crystal, you done good!!! some day I need to try and do a custom grip. (if I ever get good)
 
Nice work. I don't care for that tru-stone, but the work is top notch. I'm curious to know if the custom grip is a sleeve over the actual nib holder, or if you completely reverse engineered the grip, including the threading at the back that the feeder screws in to? Or, as I am unfamiliar with the Majestic and highly likely to remain so, does the feeder screw in to something else?
 
Sweet looking pen! I know all about the puckering...I just blew up a very nice piece of redwood burl while drilling out the cap. My own fault, the blank was just big enough and I rushed the drilling. Blank heated up and ka-pow it ended up in 6 pieces.

I love the custom grip. Great job!
 
Kaspar said:
Nice work. I don't care for that tru-stone, but the work is top notch. I'm curious to know if the custom grip is a sleeve over the actual nib holder, or if you completely reverse engineered the grip, including the threading at the back that the feeder screws in to? Or, as I am unfamiliar with the Majestic and highly likely to remain so, does the feeder screw in to something else?
Click to expand...

The threads that hold the grip to the coupler and that hold the feed are one piece that is removable with the right transfer punch. It is a press fit, so I knocked it out. So no threading was involved. The grip itself is a new piece that replaces the chrome piece that is normally there. I hope that makes sense.
 
hewunch said:
The threads that hold the grip to the coupler and that hold the feed are one piece that is removable with the right transfer punch. It is a press fit, so I knocked it out. So no threading was involved. The grip itself is a new piece that replaces the chrome piece that is normally there. I hope that makes sense.
Click to expand...

No, no. I get it. That's exactly what I wanted to know. Thanks!

I've been wanting to do this kind of stuff myself, and it sounds like the Majestic is a kit I may have to try after all. If it weren't for that $@#%*@ pimp stone. Oh well, I know how to get those out.
 
You are correct. Wow. Also on the juniors. And probably the Emperors, and the Sedona / Barons. Can't do it on the Imperial unless your able to do the threading that the CB screws on to, but that's an easier proposition than the inside threads for the feeder.

Hans, I'm glad I looked at your pen today. I've been wanting to do do material matching on the nibs for a couple of years -especially with casein. I wonder if you can also do it with some of the rollerballs? Hmmm ...

I'll have to check all the kits as I go along to see if this is an option I can offer.

Thanks again, man. I am glad to have found this out.
 
Happy to help. I fear though that this will be like many other things that I help people out on and they start turning out amazing stuff that makes mine look piddly and I get a wink and a nod :beat-up:
 
hewunch said:
Happy to help. I fear though that this will be like many other things that I help people out on and they start turning out amazing stuff that makes mine look piddly and I get a wink and a nod :beat-up:
Click to expand...

Well, if I had figured this out myself and sooner, that would have already been the case *cough* yezzz ... :tongue:

Seriously though, I am very glad to have found this out.
 
hewunch said:
So here is a nod to my good friend Brooks803, with the replaced pimp stone. And then.... ANOTHER NOTCH :smile:. I got to tell you this is my first custom grip or section whatever and I seriously had some puckering going on while drilling this baby. Anyways, comments welcome. I think it is Red Jasper Trustone. Polished to 12000 mm then Plastix Polish.
Click to expand...

hewunch said:
Happy to help. I fear though that this will be like many other things that I help people out on and they start turning out amazing stuff that makes mine look piddly and I get a wink and a nod :beat-up:
Click to expand...

hmmm....I see a trend developing :rolleyes::eek::wink::tongue::cool::biggrin:. Seriously though, you've done an amazing job Hans.
 
Very good job.
I do have a rather stupid question though.

Why hit the blanks with plastic polish after the 12000 mm?
Isn't the plastics polishs abrasive a courser abrasive?


Jerry
 
Not a dumb question at all. The plastix polish has a wax that adds to the shine and helps with fingerprints. It does have a fine abrasive that is liquid born, so it should have a different scratch pattern to help with other scratches. Regardless, it works for me.
 
Very nice pen,like it a lot. Also thanks for the info, i never thought of punching off the nib.I have a large nib that screws off and thought they all did and i couldn`t turn it. I don`t know which kit it came from though, i did so much changing around between the Gent, Emp. Imp. Stsm. mjst. in the full size ones. So you have to check,at least one in the large stlyes screws off in the RB. I wouldn`t want anybody to mess one up. Carl
 
Yeah, I am with the masses, the pen is cool but the knowledge is priceless!

I think this little gem of knowledge is going t ocause a flood of custom grips now! thanks for sharing!!
 
It is looking like it will happen Tom.

To the rest of you. Enjoy finding the "right" drill bit and sweating the drilling. :biggrin:
 
hewunch said:
Happy to help. I fear though that this will be like many other things that I help people out on and they start turning out amazing stuff that makes mine look piddly and I get a wink and a nod :beat-up:
Click to expand...

Hans;

I've seen at least a thousand posts from you, and never seen anything that looked piddly! Some people have taken your ideas and run with them, maybe even refined it a little, but that takes nothing away from the original. Keep on cranking out those ideas, some of us do remember where they came from.

James
 
Thanks James. I appreciate what you are saying. Honestly I was kidding with a couple of people who I have helped with a couple of concepts and then they take it to the stratosphere. I truly am happy to help. I want to see everyone get better.
 
Nicely done! I really like the custom grip, but somehow the stock finials look a bit out of place... Can those be knocked out also with that kit?

I may just have to buy one and try it myself!
 
Signed-In Members Don't See This Ad
You must log in or register to reply here.
Back
Top Bottom