johncrane
Member
Turning a cap finial insert using a Gemini bush, l am using the one with a long shank.The supplier for the Gemini pen kit and bushes is PSI,there are many ways to turn the cap finials this is just one l came up with.
1)use leftover blank cut off about an inch long.
2)Use a Gemini Bush' long Shank
3)CA glue the Blank too Gemini bush
4)Place the bush into drill chuck
5)Turn too size, finish,then part off.
You can also turn the a center ring using the same blank its just a matter of drilling the blank first or last.
1)use leftover blank cut off about an inch long.
2)Use a Gemini Bush' long Shank
3)CA glue the Blank too Gemini bush
4)Place the bush into drill chuck
5)Turn too size, finish,then part off.
You can also turn the a center ring using the same blank its just a matter of drilling the blank first or last.