NEJE 1500 HELP

[Dale Allen]

first real attempt

I had this unused blank laying around so I tried it in the laser.
No rotary fixture and I am still amazed at the outcome.
67 burn time BTW. Blank had several layers of CA on it.
I like this little machine!:smile-big:

 

[Dale Allen]

More tests

The brown paper went right through and etched into the platform.
The white pencil was done with the black marker on the left and without the marker on the right.
Without the marker it still burned in, even on the white paint. That surprised me.
The polyclay is uncured on the bottom and cured on the blank.
BTW, the uncured made a terrible stink!

 

[Makereality]

About the flashing light, I don't know about the meterek but the colometer and presume NEJE have two small diode red and blue lights on the back of the motherboard which will twinkle if the lower USB port is plugged into the computer. Look down at the bottom plate on the right hand side to see the reflection of the diodes, otherwise it can be easy to pop off the back with an Allen wrench and it will be obvious. You may find an unused suprise power plug receptical for a computer fan right next to the one the laser diode is plugged into!


Sent from my iPad using Penturners.org mobile app