MT2 adaptor

Signed-In Members Don't See This Ad
Signed-In Members Don't See This Ad

magpens

Member
Joined
Feb 2, 2011
Messages
15,913
Location
Canada
It has a threaded hole in the big end to accept the usual A and B mandrels both of which have the same thread, which I think is 1/4"

- Both of the precision shafts ("A" and "B") are interchangeable with this Morse Taper.
- See the Bushings and Mandrels FAQ for more general information.
 

turncrazy43

Member
Joined
Apr 22, 2012
Messages
1,104
Location
Marietta, GA
I believe the A and B shafts are used with various Berea Hard Woods Kits. You could see more about that on their web site.
Turncrazy43
 

dogcatcher

Member
Joined
Jul 4, 2007
Messages
2,359
Location
TX, NM or on the road
I am wanting to use the MT2 adapter for other things, not he A or B mandrel - thanks

Not sure on what you are wanting this for, but I suggest you look on Google for "MT2 threaded arbor" and "2MT end mill holder".

Either has possibilities to be used for creating your own specialized tooling. I use the 2MT threaded arbors for making TBC drivers and live center ends. I once needed an odd shaped live center, the same was adapted with a handful of bearings.
 
Top Bottom