2nd Pen Mill Group buy, Orders Mailed

[Daniel]

this buy will have a change or two over the last one.
either post what you want from the list below in a message here, or e-mail it to me. please do not do both.
Make sure I can e-mail you with the total cost and how to pay.

Pen Mill set $12.32

Set includes: 7.mm,8mm,3/8. and 10mm pilots, cutter head and wrench.




Pen Mill 3/4"cutter head w/ wrench $3.59

Pilot For 7mm tube $1.65
Pilot For 8mm tube $2.11
Pilot For 3/8" tube $2.87
Pilot For 10mm tube $3.10

Pilots are just the shaft with no cutter head or wrench.




7mm pen mill $5.07
8mm pen mill $5.63
3/8" pen mill $6.39
10mm pen mill $6.58

All mills include a Pilot, cutter head, and wrench

Add $5.05 for postage and pay pal transaction.
Canada and mexco add $4.40 in addition to the $5.05 above.
any other country add $6.40 in addition to the $5.05 above.


I have orders for, and have sent e-mails with totals to:
BruceK... PAID, (that has got to be a record)
Richard...PAID
Opfoto...PAID
jeff...PAID
MLKWoodWorking...PAID
fritz64...PAID
cwasil...PAID
CUTiger3...PAID
Donwood...PAID
Jarheaded...PAID
smoky10...PAID
BRobbins629...PAID
Timbo...PAID
penhead...PAID
bobm...PAID
joeatact...PAID
Lance Dupre...PAID
Poppy...PAID
hoff58...PAID
RixStix...PAID
Tas2181...PAID
great12b4ever...PAID
cutterwoodjoe...PAID
Firefyter-emt...PAID
joseph10s...PAID
kcordon...PAID
wudwrkr...PAID
JimBobTucson...PAID
SteveH...PAID
CharlesSharp...PAID
Roy99664...PAID
Jeff-in-Indiana...PAID
Dan_F...PAID
RONB...PAID
scotto51...PAID
negid...PAID
kgwaugh...PAID
ElMostro...PAID
bradb4n...PAID
wendell...PAID
Hayseedboy...PAID
J. H. ...PAID
panini...PAID
railrider1920...PAID
Postalbob...PAID
RKing...PAID
twoofakind...PAID
Pompeyite...PAID
arioux...PAID
MDWine...PAID
Darley...PAID
Codesman...PAID
Mather323...PAID
Victor...PAID
clthayer...PAID
johncrane...PAID
Boss302...PAID
LandfillLumber...PAID
gatornick...PAID
expressm...PAID
Joseph...PAID

Order placed 1-23-08 5:30 P.M.
Package arrived 1-30-08
Orders mailed 1-31-08

 

[CUTiger3]

I'd like to order the following:

Pen Mill 3/4"cutter head w/ wrench - 5ea
10mm pen mill - 2ea

Thanks,
Mike

 

[DonWood]

I would be interested in 6 of the 3/4 inch cutter heads please.

 

[Daniel]

I need specific numbers for or have questions for:
Jarheaded
BRobbins629, e-mail sent with question.
Timbo
penhead
MDWine
ElMostro
panini

Keep checking my first post. I update it constantly.

 

[smoky10]

Daniel, I would like
one pen mill set @ 11.97
thank you.

 

[Draken]

Are the shafts the cutter heads attach to PSI sized or AZ sized?

 

[opfoto]

Daniel...
Got your email, paypal sent.
Thanks,
Marc

 

[Daniel]

James, I did not know there was a difference. I have pilots from P.S.I. and CSUSA. the cutter heads fit both. I also made a bunch of pilots with cutter head shafts sized to those of P.S.I. and all fit these cutter heads. I can imagine that Berea woudl have Pilots for slightly different size tubes, but is the shaft that the head fits on different?

 

[BRobbins629]

I'll take 5 cutter heads and 2 7mm pilots. Please email me with cost and payment instructions. Thanks.

 

[bobm]

Daniel,
I'd like 4 cutter heads
thanx
bob

 

[joeatact]

I like to order4 more 3/4 cutters
8 more Pilot For 7mm tube $1.60
1 3/8" Pilot Shaft

 

[LanceD]

Daniel,

I'll take 10 cutter heads and 5 7mm pilots please.

 

[Poppy]

Daniel,

I would like following,
3/4 cutter heads - 2ea
pilot 7mm - 1

Thanx

 

[hoff58]

I would like the following:
1 - Pen Mill set
3 - Pen Mill 3/4"cutter head w/ wrench

Thanks,
Kelly

 

[Draken]

Originally posted by Daniel

James, I did not know there was a difference. I have pilots from P.S.I. and CSUSA. the cutter heads fit both. I also made a bunch of pilots with cutter head shafts sized to those of P.S.I. and all fit these cutter heads. I can imagine that Berea woudl have Pilots for slightly different size tubes, but is the shaft that the head fits on different?

If the hole in the cutter is the same as the 7mm shaft, they are PSI sized. If the hole is a fair bit smaller than the 7mm shaft, they are AZ sized. I have some of each, and I seem to like the AZ sized ones better.

 

[Daniel]

James, nope these would be P.S.I. sized then. The quality of these seems better than what I have gotten from P.S.I. or CSUSA in the past, of course how long they hold an edge is yet to be seen. Machining right out of the bag could be a bit better and I have only had problems with one out of 24 I ordered. I had to clean out the center hole a bit do to sloppy grinding work. with a total of $17.36 for a set compaired to P.S.I at I think about $45.00 now plus shipping. It's your call but the qualty of these is not lousy by any means

 

[great12b4ever]

Daniel I would like 2 of the pen mill sets @ $11.97 ea.
and 4 of the 3/4" cutter heads w/ wrench @ $3.49 ea.

If my math is right that should come to $42.80 Let me know and I will Paypal tonight

 

[Daniel]

Just a warning. the prices on the mills etc. do not include the pay pal fee of 2.9% on those items. just to let you all know the total I will send you is going to be a few cents higher due to that.
if you really want to add your own and get the correct price. add up all the items you want, add 4.90 to that then multiply that by 1.029. that is the total of your order including pay pal.

 

[Firefyter-emt]

Daniel, why don't you put me in for the set as well. Let me know how much you need.

 

[joseph10s]

Daniel,

I would like:

5 - 7mm pen mills
1 - pen mill set

Thanks for doing this again.

 

[kcordon]

Daniel,

I would like 1 set and 4 cutter heads. Send me a total and I will pay pal.

Thanks,

Kevin

 

[wudwrkr]

I would like 5 of the 3/4" cutter heads.

 

[JimBobTucson]

I'll get in on this...

I will take:
1 - Pen Mill set $11.97
4 - Pen Mill 3/4"cutter head w/ wrench $3.49

Please PM me with PP total

 

[wudwrkr]

Daniel,
Paypal Sent!

 

[Daniel]

I have the following members listed on my order sheet due to showing interest in my original thread. I have not been able to send you totals for an order for the following reasons.

Jarheaded: mentioned 5-10 Heads. need to know if 5 or 10 or ?

Timbo: mentioned 5- 10 Mills. need to know if it is 5 or 10, heads, sets, 7mm mills, or ?

penhead: same as Timbo above

MDWine: mentioned interest with no specifics.

ElMostro:mentioned 5-10 heads, need to know if 5 or 10 or ?

panini:mentioned interes with no specifics.

I ahve tried to e-mail all of you but have not gotten a reply from anyone. may be a problem at my end considering the results. Hope this message reaches you.

 

[Jarheaded]

Hey Dan,
I haven't looked at this post for a couple of days. I am going to go small on this buy. How about 15 3/4" heads. That should get me through for a week or two. Please let me know what I owe. Also, anyone that is throwing out their old ones can send them to me. I have a possible project that they may help with.
Thanks, Johnnie.

 

[thewishman]

Daniel, when will this buy be ending? Trying to round up some pen sales.

Chris

 

[Timbo]

Daniel - I'll take:

4 - Pen Mill 3/4"cutter head @ $3.49ea. $13.96
1 - Pilot For 10mm tube @ $3.01ea. $ 3.01
1 - 10mm pen mill @ $6.39ea $ 6.39
Postage and pay pal fees. $ 4.90
======
$ 28.26

 

[Daniel]

I have added photo to the items list in the original post of this thread. Hope that helps answer some questions for those of you looking and wondering just what is getting sold here.
By the way I did get Rizhengs premission to use there photos. Just showing them how we do things around here.

 

[Poppy]

Daniel

PP is on its way.

Thanx

 

[Daniel]

Originally posted by thewishman

Daniel, when will this buy be ending? Trying to round up some pen sales.

Chris

I plan to close it next wednesday evening. there will probably be a couple of days after that to squeek a last minute order in. But the way payments are coming in I wouldn't count on that.

 

[penhead]

Daniel,
Got your email, thanks..and the pics reeeealy helped

So I think I have this thing figured out..

2 Pen Mill sets @ $11.97ea = $23.94
10 Pen Mill 3/4"cutter heads w/ wrench @ $3.49ea = $34.90
TOTAL = $58.84 plus Paypal,etc..

Thanks..!

 

[Roy99664]

Daniel,

PayPal sent.

Thanks

 

[Dan_F]

Daniel,

I would like (5) 3/4" cutter heads

(8) 7mm pilot shafts

Thanks, will paypal when I receive total.

Dan

 

[scotto51]

Hi,
would like 1 set and 2 extra cutterheads.
Let me know exact total and I'll paypal on Monday.

Thanks so much for doing this for everyone!!!
Scott

 

[DonWood]

Hi Daniel - I paid for the pen mills via Paypal as requested but in my Paypal account it has not been claimed as of yet.

Just wanted to check since you show me as unpaid on the latest post.

Thanks.

Don Wood

 

[Daniel]

Hey folks, hope everyone that has been thinking about putting an order in sees this. So far the payments for orders have been coming in at about the same rate as new orders have been. That is until yesterday. Right I have only two unpaid orders and one of those is simply hung up in glitches. I have also only received a couple fo new orders in the last 24 hours. I planned to keep this buy open until wednesday, but if orders stop and everyone is paid up. I will not likely hold up products for 35 paid members. So if you have been watching and thinking you would send your order in next week, Don't. Get your order in, I will wait for payments.

 

[Daniel]

Last call for the following people.
MDWine
ElMostro
panini
I think I sort of throw a curve ball by switching threads. I really hope I have not thrown you from the tracks with that.
All of you posted interest in my other thread but I have not heard from you since. hate to have anyone left out.

 

[kgwaugh]

I'd like to order the following. The math is mostly so I know what I am comitting to; if wrong, pls change & send me PayPal info.

1 Set @ $12.32
5 3/4" Heads @ $3.59 = $17.95
Shpg & PayPal $ 5.05
TOTAL: $35.32

Thanks,

Gene

 

[bradbn4]

Daniel:

I would like
2 of the pen mill sets
5 of the 3/4" cutter heads w/ wrench

Thanks

bradbn4 - having fun in colorado