Tools??? Screwdriver kit?? - International Association of Penturners
     International Association of Penturners
Pens for Service Members
Support The IAP

Go Back   International Association of Penturners > IAP Marketplace > Old Classifieds Archive
  Forgot Password
Register FAQ Members List Search Today's Posts Mark Forums Read
Old Classifieds Archive Threads from closed classifieds forums. For historical reference only.

Logged on members can hide ads!

Welcome to!

You've found the home of The International Association of Penturners. You are currently viewing our site as a guest, which gives you limited access to view discussions, photos, and library articles.

Consider joining our community today. You'll have full access to all of our content, be able to enter our contests, find local chapters near you, and post your questions and share your experience with our members all over the world.

Membership is completely free!!

If you have any problems with the registration process or your account login, please contact us.

LinkBack Thread Tools Display Modes
Old 08-02-2011, 06:13 PM   #1 (permalink)
Local Chapter Manager
ed4copies's Avatar
Join Date: Mar 2005
Location: Racine, WI, USA.
Posts: 23,279
Photos: 27

Default Tools??? Screwdriver kit??

Introducing the Screwdriver!!!

Yes, a multi-bit screwdriver mechanism--very nice quality components. Take a look, they are immediately available.

Here is a picture of what you really receive, along with the tape measure to give you an idea of the scale of this.

The instructions suggest a 2.5" turning square, I think you could easily make this with a 1.5" x 1.5" x 5ish"

Comments welcome, as this is a new concept and we are very interested in what you think of "tools"!

Dawn & Ed
Attached Thumbnails
Ed Brown

Last edited by ed4copies; 08-02-2011 at 06:25 PM. Reason: more info on headline
ed4copies is offline   Top
Old 08-03-2011, 12:41 AM   #2 (permalink)
Join Date: Dec 2009
Location: chesapeake va
Posts: 1,646
Photos: 1


Hello Ed!
I purchased some of these from a member on here awhile back.I sold a few and gave a few out as gifts.They are very nice and really not hard to make.
corian king is offline   Top
Old 08-03-2011, 07:52 AM   #3 (permalink)
MarkD's Avatar
Join Date: Jan 2011
Location: Sayre, PA
Posts: 2,290
Photos: 55


They might make a nice Christmas gift.
MarkD is offline   Top
Old 08-03-2011, 08:20 AM   #4 (permalink)
t001xa22's Avatar
Join Date: Jun 2011
Location: Arlington, TX
Posts: 441
Photos: 138


Ed, I really like these screwdriver kits. I have attached some pics of one of four that I have made so far. These kits came from Rocklers. You are correct in figuring that the actual turned diameter is much closer to 1.5" or less. I will have to say that I like the design of the kit you are offering more than the ones I have done. One of the biggest issues I had with the other kits was that, after boring the bit holder hole in the handle to the specified diameter, the internal collar assembly was somewhat loose in the fit. You might notice on pic# 6 that I fitted a neoprene O-ring around a machined groove that was already in the collar. After fitting the O-ring, it provided a stop point for the collar into the handle. I finished by installing the collar permanently with a strong 2-part clear epoxy. None of the four I have made have had any problems, and I carry and use my last one (walnut 2-part glue-up blank) in my everyday tool bag. Now that I know you are carrying this design, I will be ordering from you soon.

Last edited by t001xa22; 08-11-2011 at 11:52 AM.
t001xa22 is offline   Top
Old 08-03-2011, 08:28 AM   #5 (permalink)
t001xa22's Avatar
Join Date: Jun 2011
Location: Arlington, TX
Posts: 441
Photos: 138


This pic might give a better idea how better craftspersons than I make the units like I have done. You can better see the machined groove in the internal collar that I fitted the O-ring on. When I epoxied my final installation, I allowed the epoxy the self-level over the collar end, totally encapsulating the rubber O-ring. You can see the O-ring, but it can never come off. According to my other recipients of the screwdrivers, they never realized that the O-ring was not part of the original assembly until I told them.
Attached Thumbnails
t001xa22 is offline   Top
Old 08-04-2011, 02:48 AM   #6 (permalink)
workinforwood's Avatar
Join Date: Mar 2007
Location: Eaton Rapids, Michigan, USA.
Posts: 8,155
Photos: 49


Wow..those all look nice!
Jeff Powell, Master Scroller
workinforwood is offline   Top
Old 08-04-2011, 06:40 AM   #7 (permalink)
Chapter Steering Committee
pensbydesign's Avatar
Join Date: Apr 2005
Location: ware, ma, USA.
Posts: 842
Photos: 0


how well will that kit work without the brass Ferrel, i think it will be prone to splitting
pensbydesign is offline   Top
Old 08-04-2011, 10:19 AM   #8 (permalink)
Assistant Moderator
Vendor Liaison
maxwell_smart007's Avatar
Join Date: Aug 2007
Location: middle of nowhere in the great, white North
Posts: 6,467
Photos: 0


Originally Posted by pensbydesign View Post
how well will that kit work without the brass Ferrel, i think it will be prone to splitting
Brass or copper ferrules are easily made from plumbing supplies...
"When it is dark enough, you can see the stars"

"He who can no longer pause to wonder and stand rapt in awe, is as good as dead; his eyes are closed."
maxwell_smart007 is offline   Top
Old 08-04-2011, 11:10 AM   #9 (permalink)
t001xa22's Avatar
Join Date: Jun 2011
Location: Arlington, TX
Posts: 441
Photos: 138


I agree about the making of ferrules from plumbing supplies. In addition to making a few other screwdriver kits, I have also made and fitted new handles for a bunch of my hand tools in my shop, including broken screwdrivers, unhandled files and rasps, and picks/probes. After calculating the size of the entrance bore hole, I was able to make brass ferrules for these tools within two I.D.s. Most of my smaller tools fit well into a 1/2" tubing, and my larger ones went into a 3/4" tubing. I would usually do a light degrease, light roughing with scotch pad, and a wipe or two with wipe-on poly to retard any tarnishing. The anti-tarnish treatment is not that important to me because I use these tools on a regular basis.
t001xa22 is offline   Top
Old 08-04-2011, 12:46 PM   #10 (permalink)
Chthulhu's Avatar
Join Date: Oct 2010
Location: Escondido, California
Posts: 233
Photos: 0


Snap-on produced these for Harley Davidson and handed them out as Christmas gifts several times while I was in their employ. Two straight, two Philips, four Torx tips. I'd love to see this version as a kit; maybe I'll cut the plastic off of one to see if I can re-use the socket. :-)
Attached Thumbnails
Mike Hungerford
Chthulhu is offline   Top
Related Content
Logged on members can hide ads


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 08:52 PM.

Powered by vBulletin® Version 3.7.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0

Content Copyright © 2003-2016 by, LLC; All Rights Reserved
Terms Of Service   Acceptable Use Policy