Carbide turning tools

Signed-In Members Don't See This Ad
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
I have Carbide wood turning tools that I make for sale.

These do not have any handles, you will have to provide your own.


Rougher 15mm x100mm (4") radius on 1/2" x 1/2" square 304 stainless steel 9" long with 2 " tang


Rougher 15mm x100mm (4") radius on 1/2 round 304 stainless steel



Finisher 16 mm round mounted on 1/2" x 1/2" square 304 stainless steel 9" long with 2 " tang



Finisher 16 mm round mounted on 1/2" round 304 stainless steel



Finisher 12mm Round 3/8 x 3/8 304 stainless steel bar 9" long. 2" tang



Finisher 12mm Round 3/8 round 304 stainless steel 9" long



Diamond Detailer 3/8 x 3/8 304 stainless steel bar 9" long. 2" tang



Diamond Detailer 3/8 round 304 stainless steel 9" long



Diamond Detailer 1/2 x 1/2 304 stainless steel bar 9" long. 2" tang



I also have them made from 1/2" round 304 stainless steel bar.

Aluminum tool bar with foam grip.
Comes in either 3/8 or 1/2" tang hole.
1 1/4" diameter x 12" long



Rougher on 1/2" Stainless steel square bar $26 plus shipping
Rougher on 1/2" Round Stainless steel bar $26 plus shipping

Finisher 16mm on 1/2" Stainless steel bar $31 plus shipping
Finisher 16mm on 1/2" Round Stainless steel bar $31plus shipping

Finisher 12 mm round on 3/8 Stainless steel bar $28 plus shipping
Finisher 12 mm round on 3/8" Round Stainless steel bar $28 plus shipping

Diamond detailer on 3/8 Stainless steel bar $32 plus shipping
Diamond detailer on 3/8 Round Stainless steel bar $32 plus shipping


Diamond Detailer 1/2" Stainless steel bar$34plus shipping
Diamond Detailer 1/2" Round Stainless steel bar $34 plus shipping

Aluminum tool bar with foam grip. $35




I do have replacement inserts:
$5 each:
15mm x 15mmx 2"r (50mm)
15mm x 15mmx 4"r (100mm)
15mm x 15mmx 6"r (150mm)
15mm x 15mmx square

16mm $10.00
12mm $8.50
Diamond detailer $9

Shipping on the inserts is $.75 each first class mail if you want tracking that will additional.
If you buy one of the turning tools and extra inserts at the same time there is no extra for the shipping the inserts.



Custom lengths are available.

John
 
Last edited:
Signed-In Members Don't See This Ad
E

Edward Cypher

Member
Joined
Feb 8, 2011
Messages
1,901
Location
Denver, Colorado
I and a friend have bought all except the diamond detailer and the handle. These are quality tools and work awesome. Well made and very clean on all surfaces. Give em a try I think you will be happy. I and my partner in crime sure are. Thanks John good stuff at a great price.
 
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
$7.15 1 or more. I can get a couple in a padded envelope after that I put them in a box and I cover the additional shipping if there is any.

Only thing if you bought tools over about a month ago I can't guarantee that the tang will fit. You might have to rework the tang to get it to fit.

The new tool bars are size to fit the handle.
 
Last edited:
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
Have a couple new tool styles,

one on the left uses the mini inserts the SQ and 2"/50mm Radius on a 3/8" stainless bar.

I should have some made up in the next week on the Square ad round bar.
The inserts are the same size that are used on the Easy Start Tools.
Not sure what all tools that the inserts will fit right yet.

Tool on the right is a Square roughing insert turned 45degrees.
Another tool used for doing detail work. Cuts a wider groove than the standard diamond detailer.

 
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
I Will not be taking any orders for a couple weeks, I ended up in the Hospital Friday night with appendicitis and they took my appendix out this morning.

So I will be out of the shop for a couple weeks.

John
 
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
Thanks Herb.

2 O'clock Friday had some upper abdominal pain think it was lunch that was causing it.

Went to work and the pain didn't get any better then about 8 it started hurting more than started getting a slight stabbing pain on the lower right. Talked to a supervisor that was a nurse and she was thinking it could be the appendix but was sure.

Left work at 9 for home talked to the wife and decide to go to the er and pain started getting bad they gave me morphine for the pain and at 2am talked too the surgeon about removing it in the morning.

They took it out everything went good. Except they had to put a catheter in during the surgery then removed it before waking up. Only thing is this is the first time I had a catheter didn't warn me about going to the bathroom that hurt worse than the appendix pain.

Hopefully I will be released Sunday and may be out if work 4-6 weeks.
 
Last edited:
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
Thanks
Im still in the hospital blood count a little high had to stay another night for IV antibiotics.
Other than that just a little sore. And hungry won't let me have any solid foods yet. Liquid foods only.
 
Y

Yablonsky

Member
Joined
Mar 24, 2017
Messages
78
Location
Aliso Viejo, CA
Wow....sorry to hear about your pain. Had my appendix out a few years back. Luckily I caught it early. They did a few minor cuts to the belly and pulled it out that way. Was actually back up on my feet next day walking the dogs. Slight pain, but pain nonetheless.

Get back on your feet soon...the faster the better for healing.

Ken
 
B

bally15

Member
Joined
Nov 15, 2015
Messages
45
Location
Alberta
When your better Im looking to see about having a rougher and finisher shipped to Canada
How much total $$
Thanks
 
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
I'm back in the shop moving a little slow but need to move around some.
if you need any tools let me know.
I plan on working on some aluminum handles.this weekend.
 
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
Adding some mini turning tools and replacement inserts
The insert are interchangeable with EWT Ci2-Square and the C12 R2- 2" Radius.

Mini Sq Rougher insert 10.5mm x 10.5mm $5 each
Mini Rougher insert 11mm x 11mm x r2"/50mm $5 each


The Mini Rougher, Mini finisher and the Mini Detailer are made with 3/8 304 stainless steel.
They measure 6" long with a 2" tang.

Mini Rougher $21 plus shipping
Mini finisher $23plus shipping
Mini Detailer $27 plus shipping

Mini Rougher




Mini Finisher using a 12mm insert




Mini Diamond Detailer


 
Last edited:
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
Neko2 said:
If I only buy one, which one is the most versitile?
Click to expand...

For basic pen turning I mainly use the rougher with the 4"/100mm insert. There are different inserts radius you can change on the rougher.

For larger stuff I started with the rougher then go to different size of finishers.
 
B

bally15

Member
Joined
Nov 15, 2015
Messages
45
Location
Alberta
My goodies showed up in the post the other day, why oh why did I wait so long?? They shave off the pen blanks so smooth.
Saved on great tools now can save by not buying extra sanding supplies.
Thanks Hanau
 
A

Aussie

Member
Joined
Oct 16, 2016
Messages
45
Location
Western Victoria,Australia
For simple pen turning, I am looking at a rougher only. I know next to nothing about which ones would be preferable other than to say that I have medium size hands if that helps. Would you recommend which one and give me a price including delivery to Ararat in Victoria Australia please?
 
H

hanau

Member
Joined
Jan 5, 2007
Messages
1,384
Location
thomasville, nc, USA.
Aussie said:
For simple pen turning, I am looking at a rougher only. I know next to nothing about which ones would be preferable other than to say that I have medium size hands if that helps. Would you recommend which one and give me a price including delivery to Ararat in Victoria Australia please?
Click to expand...

Sending you a pm
 
Signed-In Members Don't See This Ad
You must log in or register to reply here.
Previous Next
Top Bottom