Trouble in identifing a bushing set.

[avbill]

I bought a kit and drill and bushing set from (A.S.)I have a set of bushing that are now unidentified. There is five bushing. The two smaller size look like the 1A slim's. the other three are the same diameter yet two are shorter than the third bushing. All three are the same diameter.

I bought a BHW 190 [American Flat Top American] several months ago. with the "o" drill so I'm assuming the above bushing are the bushing for this pen kit. How can I tell. thank you


smaller bushing 1/2" long x 22/64" OD
large bushing 3/8" long x 31/64 OD
odd size bushing 5/8" long x 31/64" OD

any help thank you!
Bill Daniels

 

[turned_for_good]

Measure the pieces of the pen that the bushings would match up to and compare them to the size of the bushings. If they match your in luck.

 

[GBusardo]

Most of the kit instructions have the diameter of the bushings. You can check that way. The best cheap tool I ever bought was a digital caliper from Harbor Freight. I think I paid about 15 bucks on sale for it.