PSI Stopper Kit

Signed-In Members Don't See This Ad

WriteON

Member
Joined
Aug 21, 2013
Messages
3,269
Location
S. Florida
Not for me... I'm posting for a friend. The mandrel that comes with the kit is #2MT...he has #1MT lathe.... any suggestions how to proceed. Is there a MT2-MT1 adaptor that can be safely used?
Thanks, Frank
 
Last edited:
Signed-In Members Don't See This Ad

JimB

Member
Joined
Mar 18, 2008
Messages
4,683
Location
West Henrietta, NY, USA.
The PSI Bottle stopper mandrel screws onto the Spindle and is threaded 1x8. The MT of the lathe doesn't matter, only the spindle size and threading. Spindle adapters ar available from many sources including PSI.
 

WriteON

Member
Joined
Aug 21, 2013
Messages
3,269
Location
S. Florida
The PSI Bottle stopper mandrel screws onto the Spindle and is threaded 1x8. The MT of the lathe doesn't matter, only the spindle size and threading. Spindle adapters ar available from many sources including PSI.

Thank you. Question answered.
 

Lucky2

Member
Joined
Mar 2, 2012
Messages
1,502
Location
New Brunswick/ Canada
If you look up the details on the lathe at where it is sold, you will find all the specs you need.
It is more then likely a 1"x8 tpi, do you have any way to measure it.
Len
 

WriteON

Member
Joined
Aug 21, 2013
Messages
3,269
Location
S. Florida
If you look up the details on the lathe at where it is sold, you will find all the specs you need.
It is more then likely a 1"x8 tpi, do you have any way to measure it.
Len

I came up with 3/4"x16 on the lathe. so....3/4x16 to 1"x8 looks right.
 
Top Bottom