Ligero Bushings

Signed-In Members Don't See This Ad

Smitty37

Passed Away Mar 29, 2018
In Memoriam
Joined
Nov 23, 2009
Messages
12,823
Location
Milford, Delaware 19963
To those of you who like to turn between centers. I sent a couple of sets of Ligero tubes to John Goodin (jonnycnc) and he confirmed for me that his TBC Bushings for the El Grande will work for the Ligero pens. We had already confirmed that the turning diameters were the same.
 
Signed-In Members Don't See This Ad

Smitty37

Passed Away Mar 29, 2018
In Memoriam
Joined
Nov 23, 2009
Messages
12,823
Location
Milford, Delaware 19963
Not quite

John confirmed that the turning diameter was the same without the tubes but wanted to be sure the ID of the tubes was the same and wanted the tubes to do that.
 

Lenny

Member
Joined
Jan 6, 2009
Messages
3,475
Location
Searsport, Maine
John confirmed that the turning diameter was the same without the tubes but wanted to be sure the ID of the tubes was the same and wanted the tubes to do that.


It certainly pays to verify things!
Thanks !! .... to you and John for having the foresight to check this out! :)
 

johnnycnc

Member
Joined
Feb 27, 2006
Messages
3,612
Location
columbus, IN, USA.
Lenny, after the Roman Harvest being so close..but not..it pays to physically check!

With clearances at .001 total or less on this set, it is the closest fitting set I make.. so it HAS to be checked.
 

Smitty37

Passed Away Mar 29, 2018
In Memoriam
Joined
Nov 23, 2009
Messages
12,823
Location
Milford, Delaware 19963
Ulterior motive

I had an ulterior motive ---- I wanted a set and didn't want to buy them and find out they didn't work. Also had someone ask and had to say I didn't know, never having tried them.
 
Top Bottom