Circuit Board Clearance

[Mapster]

I need to know if a circuit board blank would clear a long clicker from CSUSA. I know the watch part blanks will not, but I am unsure about the circuits. I know you can carefully turn them down to sierra size, but I am not sure about clicker. If anyone has any idea please let me know, Thanks

Marshall

 

[Monty]

Sorry I can't help you there, but from your post title, I thought someone was having a clearance sale on CB blanks.

 

[Mapster]

Oh, sorry. I checked bushings and tubes and on paper the clicker has 2 hundreths of an inch more clearance than the sierra, so could a sierra be turned straight?

 

[NewLondon88]

Not sure which kit you're referring to.. the only Clicker I see from CSUSA
is not a Sierra kit. The parts are smaller and the blank is over 4" long.
The Sierra tubes are 2.21" long.
The Clicker tubes have a .342" ID, the Sierra parts are .381" so they
won't fit.
If you're referring to the Sierra Button Click, those tubes are .020 longer
than the Sierra tubes. Same tube ID.
I thought the circuit board blanks were for the Sierra Vista, not Sierra.
The Vista bushing is quite a bit thicker at .551" compared to the
Sierra bushing at .474"
This is according to the bushing chart here on IAP.. there could be other
info I don't have at my fingertips though.

 

[Mapster]

Sorry Charlie, I was wondering about the clearance of the blank. PSI now has circuit boards with a 3/8" tube. that is the tube of the Clicker, but I am wondering if there is enough space between the bushings and the tubes of the clicker for it to work. I was just using a sierra as an example. I know the blanks are meant for a vista, but people have turned them down to normal sierra size, so if that can be done, theoretically it could be done on the clicker. That is what I speculate, but am not sure about

 

[NewLondon88]

Sorry Charlie, I was wondering about the clearance of the blank. PSI now has circuit boards with a 3/8" tube.

Ah... sorry, I didn't know that was offered. Forget I said it.
In fact, tape a piece of paper over my post above so you don't
see it anymore. :biggrin: