Patience With Another Finish

Signed-In Members Don't See This Ad
See more from rd_ab_penman

rd_ab_penman

Member
Joined
Jun 1, 2007
Messages
1,646
Location
Red Deer, Alberta, Canada.
On a Gold Titanium Ballpoint Cigar with Bubinga.

Sanded to 12,000 MM, applied three coats of Minwax High Gloss, sanded with 1500 grit between first three coats and then applied another final 3 coats. Wet sanded from 4,000 down to 12,000 MM and applied 2 protective coats of Brazilian Carnauba.

Takes more time and quite a bit patience to complete, but final finished results, I think are worth it.

As always suggestions and comments welcome.

dsc0cigartitaniumgoldbade8.jpg


cigartitaniumgoldballpoii7.jpg
 
Signed-In Members Don't See This Ad

MichaelS

Member
Joined
Feb 22, 2008
Messages
73
Location
USA.
I know I'm late on this, but more info on the process please. The finish looks like glass and sounds like it would last a long time under normal use.
 
Top Bottom