September Meeting

stealth555 · 02-27-2011, 08:54 AM

I know this is a bit early, but figured I might as well get it out there. The next meeting is in May at Monthy's. After that, I would love to host one at the store in Houston on September 17th.

If that sounds good, I will start working towards door prizes and other things that I can squeeze out of Rockler. ;)

dplloyd · 03-05-2011, 07:05 AM

I'm marking both dates on my calender. I unfortunately missed the most recent one. Looking forward to it

stealth555 · 06-24-2011, 11:01 AM

Everyone,
Based on conversations I have had and other timing issues, I need to change the date to September 10th.

Regards,

Steve

KiltedGunn · 06-25-2011, 10:42 AM

Still works for me!

stealth555 · 07-26-2011, 07:59 PM

Ok guys. I am wanting to get an idea of some of the deos you may be wanting to see or topics you may want to discuss. Leave your ideas here and I will see what can be done to facilitate them at the meeting.

Looking forward to seeing everyone.

dplloyd · 08-01-2011, 07:08 AM

How about some sharpening techniques.

I have the Wolverine One Way jig.

stealth555 · 08-02-2011, 08:04 AM

Pat,

Sounds good. I have the Tormek T7. I will bring it and one of my guys has a grinder and Wolverine. i will see if I can get him to bring that.

Any other ideas folks?

rsjimenez · 08-04-2011, 12:26 AM

I would like for somebody to demonstrate the use of a skew.

fireangels · 08-04-2011, 03:44 AM

having a hard time with this CA finish possibly a short go over

rsjimenez · 08-04-2011, 09:50 AM

Also, I want to let everybody know that I will be bringing my Carbon Fiber Blanks to sale.

02-27-2011, 08:54 AM	#1 (permalink)
stealth555 Join Date: Dec 2006 Location: Friendswood, TX Posts: 28 Photos: 4	September Meeting I know this is a bit early, but figured I might as well get it out there. The next meeting is in May at Monthy's. After that, I would love to host one at the store in Houston on September 17th. If that sounds good, I will start working towards door prizes and other things that I can squeeze out of Rockler. ;)

03-05-2011, 07:05 AM	#2 (permalink)
dplloyd Join Date: Jul 2010 Location: Pearland, TX Posts: 140 Photos: 0	I'm marking both dates on my calender. I unfortunately missed the most recent one. Looking forward to it __________________ Pat Lloyd

06-24-2011, 11:01 AM	#3 (permalink)
stealth555 Join Date: Dec 2006 Location: Friendswood, TX Posts: 28 Photos: 4	DATE CHANGE Everyone, Based on conversations I have had and other timing issues, I need to change the date to September 10th. Regards, Steve

06-25-2011, 10:42 AM	#4 (permalink)
KiltedGunn Join Date: Jan 2009 Location: Baytown, TX Posts: 292 Photos: 0	Still works for me! __________________ Lee aka KiltedGunn TexasMattings-at-Comcast-dot-Net __________________________________________________ _______ As Will Rogers said, There're 3 kinds of folks in this ol' world: The ones that learn by reading. The few who learn by observation. The rest of them have to pee on the electric fence and find out for themselves. Can you guess which one I am?

08-01-2011, 07:08 AM	#6 (permalink)
dplloyd Join Date: Jul 2010 Location: Pearland, TX Posts: 140 Photos: 0	How about some sharpening techniques. I have the Wolverine One Way jig. __________________ Pat Lloyd

07-26-2011, 07:59 PM	#5 (permalink)
stealth555 Join Date: Dec 2006 Location: Friendswood, TX Posts: 28 Photos: 4	Ok guys. I am wanting to get an idea of some of the deos you may be wanting to see or topics you may want to discuss. Leave your ideas here and I will see what can be done to facilitate them at the meeting. Looking forward to seeing everyone.

08-02-2011, 08:04 AM	#7 (permalink)
stealth555 Join Date: Dec 2006 Location: Friendswood, TX Posts: 28 Photos: 4	Pat, Sounds good. I have the Tormek T7. I will bring it and one of my guys has a grinder and Wolverine. i will see if I can get him to bring that. Any other ideas folks?

08-04-2011, 12:26 AM	#8 (permalink)
rsjimenez Join Date: Nov 2010 Location: Alvin, TX Photos: 4	I would like for somebody to demonstrate the use of a skew. __________________ Ramon S. Jimenez Alvin, TX www.gulfcoastpens.com

08-04-2011, 03:44 AM	#9 (permalink)
fireangels Join Date: May 2011 Location: Fresno,Texas Posts: 129 Photos: 1	having a hard time with this CA finish possibly a short go over __________________ There ain't no rest for the wicked !!!!!

08-04-2011, 09:50 AM	#10 (permalink)
rsjimenez Join Date: Nov 2010 Location: Alvin, TX Photos: 4	Also, I want to let everybody know that I will be bringing my Carbon Fiber Blanks to sale. __________________ Ramon S. Jimenez Alvin, TX www.gulfcoastpens.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Welcome to penturners.org!