International Association of Penturners - View Single Post - Skull Pen Kit Issues
View Single Post
Old 11-07-2017, 10:22 PM   #11 (permalink)
SawdustHappy
 
Join Date: Oct 2017
Location: Indiana
Posts: 22
Photos: 0

Default

Quote:
Originally Posted by Wce274 View Post
I made one a while back and had the same trouble with mine as well did you get it from psi


Sent from my iPhone using Penturners.org mobile app
Yes I did. I emailed them, and still no response. But I was able to get it all figured out with the help from Ed & Chuck. The Nib was pinching the cartridge, so I filed it down on the inside, so the cartridge would pass smoothly. but the bottom barrel was also a hair to short. I guess I trimmed the barrel too much/ inserted the mid section that attaches to the transmission too much. I got a transfer punch, and slowly hammered it back out, until I was able to get it to move open/close smoothly. I would literally say it took a width of 2 hairs to get it to work.

Thank you all for your help! I don't know what I would have done without you guys!
SawdustHappy is offline   Reply With Quote Top